Passer aux informations produits
1 de 15

A1.045 EPDM & Neoprene Self-Grip Rubber Edge Trim Seal – 1–4mm Panel

A1.045 EPDM & Neoprene Self-Grip Rubber Edge Trim Seal – 1–4mm Panel

Prix habituel £4.78 GBP
Prix habituel Prix promotionnel £4.78 GBP
Promotion Épuisé
Taxes incluses. Frais d'expédition calculés à l'étape de paiement.
  • 1m / 50m
  • Minimum Panel Thickness:  1mm
  • Maximum Panel Thickness:  4mm
  • Overall Profile Width: 19mm | Gripping Section Height: 13mm
  • EPDM Bubble, Neoprene Trim
  • UK Mainland from £6.95
Quantité

EPDM & Neoprene Self-Grip Rubber Edge Trim Seal – 1–4mm Panel

Our Self-Grip Rubber Edge Trim Seal is a versatile sealing and edge protection profile designed for automotive, caravan, campervan, marine and industrial applications.

Combining a reinforced U-shaped gripping channel with a flexible compressible sealing section, this rubber profile provides both protective edging and weather sealing in one practical solution.

Designed to fit compatible panel edges between 1mm and 4mm thick, the integrated metal gripping core helps secure the trim in place without requiring additional adhesive or mechanical fixings.

Whether you're replacing a worn car boot seal, improving door weatherproofing or finishing exposed panel edges, this flexible rubber profile provides a durable solution for suitable installations.

Key Features & Benefits

Self-Gripping Rubber Edge Protection

The reinforced U-channel features an internal metal gripping core that helps secure the trim onto compatible panel edges.

This push-on fitting method makes installation straightforward while providing a neat finish around exposed metal, plastic and other suitable panel materials.

Flexible Weatherproof Sealing

The compressible sealing section is designed to make contact with an adjoining surface when a door, hatch or panel is closed.

When correctly fitted, the rubber helps reduce water ingress, draughts, dust, vibration and unwanted rattling.

EPDM & Neoprene Construction

The product combines weather-resistant rubber materials with a reinforced gripping section.

EPDM offers good resistance to weathering, ozone and ultraviolet exposure, while the neoprene component provides flexibility and cushioning for suitable sealing applications.

The profile is designed to follow compatible curves and contours, making it useful for vehicle restoration, conversion projects and general protective edging.

Versatile Applications

This rubber edge trim is suitable for a wide variety of applications where the panel thickness, mounting arrangement and sealing gap match the profile dimensions.

Its combination of edge protection and compressible sealing makes it particularly useful for vehicle door openings, boot compartments, hatches and equipment enclosures.

Technical Specifications

Specification Details
Product type Self-gripping rubber edge trim seal
Material EPDM and neoprene components
Gripping section Reinforced U-channel
Internal reinforcement Metal gripping core
Panel fitting range 1–4mm
Sealing section Compressible rubber bulb
Colour Black
Fitting method Self-gripping / push-on
Adhesive required No, where correctly fitted
Temperature range −20°C to +40°C
Available lengths 1m option and 50m coil
Maximum continuous coil length 50 metres

Important: Always compare the complete rubber cross-section and panel fitting dimensions before purchasing. The correct fit depends on the panel thickness, profile shape and required sealing gap.

Suitable Applications

Automotive Door & Boot Seals

This flexible rubber profile can be used for compatible car doors, boot openings, tailgates, bonnets and other automotive sealing applications.

The self-gripping channel helps retain the seal on suitable bodywork flanges, while the compressible bulb provides a contact surface between the adjoining panels.

It is particularly useful for vehicle restoration and replacement projects where the original rubber has become worn, cracked or permanently compressed.

Citroën C1, Peugeot 107 & Toyota Aygo Boot Seals

This rubber profile is also used for certain Citroën C1, Peugeot 107 and Toyota Aygo boot seal replacement applications, subject to the vehicle's existing sealing arrangement.

For compatible installations, approximately 3.6 metres may be required around the boot opening. Customers should measure their own vehicle before ordering.

A 4-metre length provides additional material for trimming and fitting.

Compatibility depends on the model, production year and original rubber profile. Always compare the existing seal before purchasing.

Caravan, Campervan & Motorhome Seals

For compatible caravan and campervan applications, this self-gripping rubber profile can provide protective edging and weather sealing around suitable doors, access panels, lockers and hatches.

The flexible design makes it useful for certain vehicle conversions and restoration projects where a compressible seal is required.

Marine & Boat Applications

This profile may be suitable for certain boat hatches, access panels and marine edge-protection applications where the material and fitting dimensions meet the installation requirements.

For exposed marine environments, always confirm the suitability of the rubber compound and sealing arrangement.

Industrial & Commercial Applications

The reinforced rubber edge trim may also be used on suitable machinery enclosures, equipment cabinets, storage compartments and fabricated panels.

Its self-gripping design provides a practical way to protect exposed edges while creating a compressible sealing surface.

How to Choose the Correct Rubber Edge Trim

Before ordering, measure the thickness of the panel or flange onto which the rubber will be fitted.

This profile is designed for 1–4mm panel thicknesses, but it is equally important to check the overall profile dimensions and the position of the sealing bulb.

Compare the technical drawing with your existing seal, paying particular attention to the gripping channel, bulb size and available compression gap.

If you're replacing an older rubber seal, remember that the original material may have become compressed or distorted over time.

How to Fit Your Self-Grip Rubber Edge Trim

Begin by inspecting the existing seal and mounting edge. Remove any damaged rubber where appropriate and clean the fitting surface thoroughly.

Position the U-shaped gripping channel over the compatible panel edge and carefully press the rubber into place.

Work progressively around the fitting area, ensuring the seal sits evenly without excessive stretching or twisting.

For tight corners or difficult sections, use an appropriate non-damaging fitting tool where necessary.

Once installed, carefully close the adjoining door, hatch or panel and check that the sealing bulb makes consistent contact without interfering with the closing mechanism.

Additional adhesive is not normally required when the profile is correctly matched to the mounting edge.

How to Order

Our Self-Grip Rubber Edge Trim Seal is available in 1-metre lengths and 50-metre coils.

1 Metre Option

Select the 1m option and enter the number of metres required.

For example, quantity 5 represents 5 metres of rubber, supplied in one continuous length where available.

50 Metre Coil

For larger installations, professional use or trade requirements, select the 50m coil option.

Each quantity ordered represents one complete 50-metre coil.

Please check the selected length, required measurements and panel fitting range before ordering.

Frequently Asked Questions

Does This Rubber Edge Trim Require Adhesive?

No. The internal metal gripping core is designed to secure the rubber onto compatible panel edges without additional adhesive.

Is This Suitable for Car Boot Seals?

Yes, the profile may be suitable for compatible car boot sealing applications, including certain Citroën C1, Peugeot 107 and Toyota Aygo installations. Always compare the original rubber profile before ordering.

Can It Be Used Outdoors?

The rubber materials are suitable for consideration in outdoor weather-sealing applications, subject to the specific environmental conditions and product limitations.

Can the Rubber Be Cut to Length?

Yes. The flexible profile can be cut to the required length using suitable cutting tools.

Explore More Rubber Seals & Edge Trims

Looking for other rubber sealing and protective edging solutions?

Explore our Automotive Rubber Seals & Trims collection for vehicle door seals, boot rubbers and protective profiles.

For caravan repairs and campervan conversions, browse our Caravan, Campervan & Motorhome Rubber Seals collection.

You can also explore our Edge Trims Collection for alternative rubber and PVC edging profiles.

Not Sure Which Rubber Profile You Need?

Try our Find Your Perfect Seal tool to narrow down suitable products based on your application, measurements and fitting requirements.

If you're unsure which rubber seal is suitable, contact our team with a photograph of your existing profile and its dimensions before ordering.

Afficher tous les détails